Note: Please do not link down into my pages. I change this directory structure often and your links will not work correctly.
![]() | ![]() |
Subminiature type used as af power amplifier in subminiature equipment. Requires either a subminiature socket or direct soldering of the wires from the tube to circuit components.
EIA Outline ................................... 3-3
EIA Base ...................................... 8DL
Heater Voltage ................................ 6.3 V
Heater Current ................................ 0.45 A
Pentode
Input ......................................... 6.5 pf
Output ........................................ 7.5 pf
Grid to Plate ................................. 0.11 pf
Pentode
Plate Voltage ................................. 165 V
Grid No. 2 Voltage ............................ 155 V
Plate Dissipation ............................. 4.1 W
Grid No. 2 Dissipation ........................ 0.4 W
Class A Amplifier
Plate Voltage ................................. 110 V
Grid No. 2 Voltage ............................ 110 V
Grid No. 1 Voltage Derived from
Cathode Bias Resistor ...................... 270 Ω
Plate Resistance (approx) ..................... 15000 Ω
Transconductance .............................. 4200 µ
Plate Current ................................. 30 mA
Grid No. 2 Current ............................ 2.2 mA
Load Resistance ............................... 3K Ω
Power Output (approx) ......................... 1.0 W
If you are uncertain about the EIA designator for a particular tube please use the "Index" button to list all the tubes in the database. You can click on the designator for the closest tube.
(c) 1994-2021 by William A. Beech, NJ7P
Thu, 02 Feb 2023 05:11:44 -0700